Air blast for steam bath

for commercial use

Air blast for steam baths

"A special experience in the steam bath is the air shower. In this "air shower", compressed air is blown into the steam bath via nozzles. The jets are installed in the cabin ceiling above each seat. After the attraction starts, the upper, hot air layers of the steam bath flow onto the guests sitting below. For them, the effect feels like a sauna infusion and offers a unique feel-good experience. The air blast for steam baths consists of a pneumatic control unit, an oil-free compressor with expansion vessel, the push buttons and nozzles." WDT

Technology for steam baths

The air blast for steam baths is a pneumatic control unit for an "air shower" in steam baths.
The corresponding air jets are installed above the seats in the steam bath. By pressing a button, the hot upper air layers of the steam bath are then pressed onto the guests on the seats. For the guests, this feels like the effect of a sauna infusion.

Luftdusche-im-Dampfbad-fire-ice-sauna

Air blast WDT

The air blast for steam baths is a pneumatic control unit for an "air shower" in steam baths. The associated air jets are installed above the seats in the steam bath. By calling them up with a push-button, the hot upper air layers of the steam bath are then pressed onto the guests on the seats. For the guests, this feels like the effect of a sauna infusion.

A complete package for an air blast consists of the following components:

  • Electronic and pneumatic control consisting of:
  •  Microprocessor control in housing
  • Rotary potentiometers for setting the individual parameters
  • Socket for connecting the compressor
  • Completely pre-assembled and pre-wired on mounting plate PP grey
  • Ball valve ½"
  • Pneumatic filter pressure regulator with water separator, adjustable
  • Compressed air buffer tank connection
  • Compressed air connection, connection to the compressor
  • Solenoid valve(s) - according to the number of seats in the cabin

Stainless steel pressure vessel:

  • 20 l, pre-assembled on the back of the mounting plate

Compressor oil-free:

  • 230V/50 Hz (60 Hz)
  • Output 49 l/min at 5 bar
  • Drive power 0.45 kW
  • Pressure vessel 10 l
  • Control valve 1/8" normally open
  • Dimensions W x L x H: 360 x 390 x 420 mm
  • Weight: 17 kg
  • Noise: 58 dB(A)
    Button plate(s) 1-fold
  • with flush-mounted box and nameplate to start the programme. According to the number of seats in the cabin
    Drizzle nozzles
  • according to the number of seats in the cabin
  • Electrical connection 230V/AC 50 Hz
  • Connected load 550 W (incl. 450 W compressor)
  • Size (WxHxD): 50x50x45
  • Weight 7,5 kg
  • Technical room/cabinet for installation of the control panel
  • 230 V socket
  • Compressed air line to the nozzles (depending on the number of nozzles, see technical data)
  • The ambient temperature in the technical room must be between +5 and +40 °C
  • The air humidity must not exceed 80 % relative humidity
  • Due to the noise generated by the compressor, a sound-insulating design is recommended

More from Fire & Ice

Steam bath elements made of GRP

Previous slide
Next slide

Exclusive design and a variety of high-quality materials make it possible to create an individual steam bath entirely according to your ideas. Fire & Ice offers a large number of variations in floor plan, shapes and colours. The elements are made individually for you on request. You will receive individual professional advice from Fire & Ice.

Module acrylic steam bath

Previous slide
Next slide

Using steam bath modules, you can design your very own steam bath either for your private or even public wellness area. The acrylic seating elements are quick and easy to clean. Fire & Ice will be happy to advise you on which module best suits you based on the room situation.

Advice from A-Z

Bild Georg Zelger

We advise you online and by telephone. No matter what enquiry you have or what advice you are looking for, we have specialists in-house for every concern who will provide you with friendly, customer-oriented advice. Can't find a particular product in our range? We are constantly adding new products. Please do not hesitate to contact us, we will try to fulfil every wish. We also support you in the implementation of your project, from planning to turnkey handover.

en_GBEnglish (UK)