Brine nebulization WDT

for commercial and private use

Brine systems

Solever fog to create a salty climate in sauna facilities. Our brine plants offer interval operation, which can be adjusted individually according to the operator’s request – the size is scalable for different plant sizes.
By ultrasonic atomization of the brine solution, the velvety brine nebula is distributed throughout the room. This has a positive effect on the respiratory tract and , in combination with heat, has a very relaxing effect on the muscles.

Fogging of brine solution

“In science and medicine, the positive influence of brine and salt on people is undisputed. It helps with skin and respiratory problems. The mineral has been used as a remedy (mainly in dissolved form, as brine) for thousands of years.” Brine nebulization WDT

Soleverneblung_WDT

Brine fogging systems for dry rooms

Brine fogging - SOLDOS-SL-V3

Previous
Next

Brine misting system for creating a salty marine climate in dry rooms. The Soldos SL atomizes germ-free brine solution with the help of compressed air in brine cabins. After a short time, a salty marine climate forms in the room. The dosing capacity is sufficient for rooms up to approx. 35 m² floor area. The brine is sucked out of an airtight collapsible bag (politainer) by means of a peristaltic pump and conveyed to the two-substance atomizer nozzle. There the brine is finely atomized with the aid of compressed air at the nozzle and blown into the cabin. By using sterilized brine from the politainer, the risk of contamination of the solution is minimized. A disinfection system is also integrated in the system. Operation is via a 3.2 “full color touch display with a variety of new setting options such as:

  • Operating modes: cycle operation, pushbutton operation and operation through external control
  • Weekly program to determine the operating times individually for each day
  • Light and sound control in combination with brine fogging
  • Empty switch for switching off the system when the brine tank is empty
  • Day counter for signaling the need for disinfection and a visual description of the process
  • Definition of a user hierarchy with several user levels
  • Area of application tepidariums, saunas, salt rooms
  • Electrical connection 230V / AC 50Hz
  • Connection cable 455W
  • Size (WxHxD): 47x71x24 cm
  • Size compressor (WxHxD): 24x25x16 cm
  • Sound emission of the compressor in the technical room 80 dBA
  • Sound emission at a distance of one meter from the nozzle 70 dBA
  • Empty weight / operating weight: approx. 20 kg / 25 kg.
  • Working range + 10 ° C to + 35 ° C
  • Protection class IP44
  • Atomizer output brine approx. 32 l brine / h at 40 s. Dosing time and 5 min. Break
  • Control with 3.2 “touch built into the housing
  • Peristaltic pump SA with speed control for setting the dosage
  • Water separator
  • Diaphragm piston compressor (floor standing)
  • Two-substance nozzle made of stainless steel V4A with cover panel, wall duct, 5 m dosing line PTFE and 5 m air line PE
  • Disinfection set with disinfection tablet, mixing container and recipient
  • 5 kg (optionally 1 kg) aseptic brine solution in the politainer
  • Design cover
  • Technical room / cabinet for installing the system
  • 230 V socket
  • Before installation, all materials must be checked for their corrosion resistance to the salty water / air mixture in the room, both in the corresponding cabin and in the supply and exhaust air ducts.
  • The dosing station has no medical approval.
  • Use only ultra-pure, disinfected WDT brine solution with approx. 5% brine content. WDT brine is supplied in a closed container. Open brine contaminates and must therefore not be used in the interests of preventive health care.
  • Push button plate with flush box
  • Second pump and nozzle for cabins larger than 35 m²
  • Effect lighting
  • MP3 player and speakers

Solenebler SOLFOG V2

The brine nebuliser generates a very fine, dry mist from a high-purity brine solution using an ultrasonic mist generator. This dense mist is fed into the room by an air flow generated in the device. This creates a salty sea climate in the respective room. The brine is sucked out of an airtight collapsible bag (politainer). By using sterilized brine from the politainer, the risk of contamination of the solution is minimized. A disinfection system is also integrated in the system. A salty room climate is considered to promote healing in respiratory and skin diseases. In addition, the corresponding room can be scented with the system. For this purpose, fragrance concentrate is evaporated in the system and the flavored air is blown into the room together with the brine mist.

  • Areas of application: relaxation rooms, infrared cabins, salt rooms
  • Electrical connection: 230V / AC 50Hz
  • Connected load: 50W
  • External control: port-free contact
  • Area of application: indoor
  • Dimensions (WxHxD): 40x71x25 cm
  • Connection of fogger pipe: d 40 mm
  • Working range: +10 to + 35 ° C
  • Protection class: IP44
  • Empty / operating weight: 11 kg / 16 kg
  • Atomization brine: max. 0.5 l / h
  • NT-35 microprocessor control in housing
  • 5-line LCD display with 3 control buttons
  • Peristaltic metering pump SA for brine replenishment
  • fan
  • Ultrasonic nebulizer
  • Mist container
  • Mounting plate with console for max. 5l brine
  • Disinfection set with disinfection tablet, mixing container and recipient
  • 5kg aseptic brine solution in the politainer
  • Technical room / cabinet for installing the system
  • Socket 230 V / 50 Hz
  • Piping to the room / cabin, d 40mm
  • Before the installation, all materials, both in the corresponding cabin and in the supply and exhaust air ducts, must be checked for their corrosion resistance to salty air in the room.
  • The dosing station has no medical approval.
  • Use only ultra-pure, disinfected WDT brine solution with approx. 5% brine content. WDT brine is supplied in a closed container. Open brine contaminates and must therefore not be used in the interests of preventive health care. Suitable for rooms up to max. 60 ° C room temperature
  • Push button plate with flush box
  • Nozzle cover made of stainless steel
  • Fog cone tube made of PVC, d 40mm with fog shield made of aluminum
  • Fragrance

Brine misting systems for steam baths

Brine dosing SOLDOS V3

Previous
Next

Brine misting system for creating a salty marine climate in steam cabins. The Soldos sprays finely atomized, germ-free brine solution in steam cabins. After a short time, a salty marine climate forms in the room. The dosing capacity is sufficient for rooms up to approx. 25 m² floor area. The brine is sucked out of an airtight collapsible bag (politainer). It is pressed through a fine nozzle under high pressure with a membrane pump and atomized. By using sterilized brine from the politainer, the risk of contamination of the solution is minimized. A disinfection system is also integrated in the system. Operation is via a 3.2 “full color touch display with a variety of new setting options such as:

  • Operating modes: cycle operation, pushbutton operation and operation through external control
  • Weekly program to determine the operating times individually for each day
  • Light and sound control in combination with brine fogging
  • Pressure monitoring for level of brine and blockage of nozzle
  • Day counter for signaling the need for disinfection and a visual description of the process
  • Definition of a user hierarchy with several user levels
  • Application area steam baths
  • Electrical connection 230V / AC 50Hz
  • Connection cable 350W
  • Size (WxHxD): 47x71x24 cm
  • Empty weight / operating weight: approx. 15 kg / 20 kg.
  • Working range + 10 ° C to + 35 ° C
  • Protection class IP44
  • Atomizer output brine approx. 100 ml / min
  • Control with 3.2 “touch built into the housing
  • Motorized diaphragm pump, low-noise
  • Mounting plate with console for brine tank
  • Nozzle made of stainless steel V4A with cover panel PE
  • Wall bushing with 5 m metering line PTFE
  • Disinfection set with disinfection tablet, mixing container and recipient
  • 5 kg (optionally 1 kg) aseptic brine solution in the politainer
  • Design cover
  • Technical room / cabinet for installing the system
  • 230 V socket
  • Before installation, all materials must be in both
    the corresponding cabin, as well as in supply and exhaust air ducts
    on their resistance to corrosion
    the salty water / air mixture in the room
    be checked.
  • The dosing station has no medical approval.
  • Only high-purity, disinfected WDT brine solution with
    Use approx. 5% brine content. WDT Sole is used in
    closed container delivered. Open brine
    contaminated and therefore allowed in terms of health
    Precaution cannot be used.
  • If the SOLDOS is at a higher level than that
    A check valve must be installed in the nozzle
    Dosing line can be installed.
  • The Soldos V3 is not suitable for use in dry
    Cabins. Recommend for this purpose
    we use our systems SOLDOS-SL or SOLFOG.
  • Push button plate with flush box
  • Second pump and nozzle for cabins larger than 25 m²
  • Effect lighting
  • MP3 player and speakers
  • Nozzle cover in stainless steel

Brine dosing Soldos V3-2P with two nozzles

Previous
Next

SOLDOS-V3-2P for nebulizing brine in steam baths. Suitable for bathrooms larger than 25 m². Dosing station for brine fogging with 2 pumps and 2 nozzles.
Brine is an important part of a steam bath. The effect of the brine on our body is very positive in many ways. It reduces respiratory illnesses and helps relieve sleep disorders. The healthy sea climate with salty air has a healing effect on skin problems and circulatory problems.

  • Application area steam baths
  • Electrical connection 230V / AC 50Hz
  • Connection cable 350W
  • Size (WxHxD): 47x71x24 cm
  • Empty weight / operating weight: approx. 15 kg / 20 kg.
  • Working range + 10 ° C to + 35 ° C
  • Protection class IP44
  • Atomizer output brine approx. 100 ml / min
  • Control with 3.2 “touch built into the housing
  • Motorized diaphragm pump, low-noise
  • Mounting plate with console for brine tank
  • Nozzle made of stainless steel V4A with cover panel PE
  • Wall bushing with 5 m metering line PTFE
  • Disinfection set with disinfection tablet, mixing container and recipient
  • 5 kg (optionally 1 kg) aseptic brine solution in the politainer
  • Design cover
  • Technical room / cabinet for installing the system
  • 230 V socket
  • Before installation, all materials must be in both
    the corresponding cabin, as well as in supply and exhaust air ducts
    on their resistance to corrosion
    the salty water / air mixture in the room
    be checked.
  • The dosing station has no medical approval.
  • Only high-purity, disinfected WDT brine solution with
    Use approx. 5% brine content. WDT Sole is used in
    closed container delivered. Open brine
    contaminated and therefore allowed in terms of health
    Precaution cannot be used.
  • If the SOLDOS is at a higher level than that
    A check valve must be installed in the nozzle
    Dosing line can be installed.
  • The Soldos V3 is not suitable for use in dry
    Cabins. Recommend for this purpose
    we use our systems SOLDOS-SL or SOLFOG.
  • Push button plate with flush box
  • Second pump and nozzle for cabins larger than 25 m²
  • Effect lighting
  • MP3 player and speakers
  • Nozzle cover in stainless steel

Brine mist maker SOLFOG WDT

Solenebler SOLFOG generates very fine, dry fog by means of an ultrasonic fogger. This mist is supplied by an air flow generated in the device. This device creates a salty marine climate. In addition, the corresponding room can also be scented with this system. A fragrance concentrate is evaporated in the system and the flavored air with the brine mist is sprayed into the room. Thanks to the sterilized brine from the politainer, the risk of contamination of the solution is prevented. A disinfection system is also integrated in the system.

  • Area of application: relaxation rooms,
  • Infrared cabins, salt rooms
  • Electrical connection: 230V / AC 50 Hz
  • Connected load: 455 W.
  • Size (WxHxD): 45x71x24 cm
  • Size compressor: 24x25x16 cm
  • Empty / operating weight: about 20 kg / 25 kg
  • Noise emissions from the compressor in the technical room: 80 dBA
  • Noise emission in one meter
  • Distance to the nozzle: 70 dBA
  • Working range: + 10 ° C to + 35 ° C
  • Protection class: IP44
  • Atomizer output brine: approx. 0.32 l
  • Brine / h with 40 s dosing time and 5 min break
  • Microprocessor control UNPL in housing
  • Rotary potentiometers for setting the individual parameters
  • Peristaltic pump SR10 for brine replenishment
  • fan
  • Ultrasonic fogger
  • Fog container
  • Mounting plate with console for brine tank
  • Disinfection set with disinfection tablet, mixing container and recipient
  • 5 kg aseptic brine solution in the politainer

Brine solution 6 x5 ltr.
WDT

Brine solution with disinfection sticks for brine cover. Spare parts and accessories for saunas, steam baths. Brine. Germ-free, 5% brine solution for spraying in steam baths with SOLDOS to create a salty marine climate.

Filled in a politainer (collapsible pouch) to keep the solution sterile.

Get health with Fire & Ice

Saltstones

Many possibilities for interior design with the salt blocks of Fire & Ice. Through a pleasant play of light, the salt stones have a beneficial effect on our emotional well-being and give us the invigorating freshness. It is a wonderful addition for both private and public spaces.

Previous
Next

Infrared emitters

Different variants of infrared emitters, both surface, ceramic and magnesium emitters, as well as deep heat emitters and full-spectrum emitters. Short heating times, low temperatures for minor physical stress as well as high-quality accessories such as colour light devices and infrared cabin facilities clearly speak for this type of sauna.

Previous
Next

Advice from A-Z

Bild Georg Zelger

We advise you online and by phone. No matter which request you have or which advice you are looking for, we have specialists in our company for every request, who offer you a friendly, customer-oriented advice. You can't find a specific product in our range? We are constantly accepting new products. Please do not hesitate to contact us, we try to fulfill every wish. We also support you in the implementation of your project from planning to turnkey handover.