Brine fogging WDT

for commercial and private use

Brine plants

Brine fogging to create a salty climate in sauna facilities. Our brine systems offer interval operation, which can be set individually according to the operator's wishes - the size is scalable for different system sizes.
Ultrasonic atomisation of the brine solution distributes the velvety fine brine mist throughout the room. This has a positive effect on the respiratory tract and - in combination with heat - has a very relaxing effect on the muscles.

Brine solution nebulisation

"In science and medicine, the positive influence of brine and salt on humans is undisputed. It helps with skin and respiratory complaints. The mineral has been used as a remedy (mainly in dissolved form, as brine) for thousands of years." Brine nebulisation WDT

Soleverneblung_WDT

Brine fogging systems for dry rooms

Brine fogging - SOLDOS-SL-V3

Previous slide
Next slide

Brine fogging system for creating a salty sea climate in dry rooms. The Soldos SL atomises germ-free brine solution with the help of compressed air in brine cabins. After a short time, a salty sea climate is created in the room. The dosing capacity is sufficient for rooms up to approx. 35 m² floor space. The brine is sucked out of an airtight folding bag (politainer) by means of a hose pump and conveyed to the two-substance atomiser nozzle. There, the brine is finely atomised at the nozzle with the help of compressed air and blown into the cabin. By using sterilised brine from the Politainer, the risk of contamination of the solution is minimised. In addition, a disinfection system is integrated into the unit. Operation is via a 3.2" full colour touch display with a variety of new setting options such as:

  • Operating modes: cyclic operation, push-button operation and operation by external control
  • Weekly programme for setting the operating times individually for each day
  • Light and sound control in combination with brine fogging
  • Empty switch for switching off the system when the brine tank is empty
  • Day counter to signal a necessary disinfection and visual description of the process
  • Definition of a user hierarchy with several user levels
  • Area of application Tepidaria, saunas, salt rooms
  • Electrical connection 230V/AC 50Hz
  • Connection cable 455W
  • Size (WxHxD): 47x71x24 cm
  • Size compressor (WxHxD): 24x25x16 cm
  • Sound emission of the compressor in the plant room 80 dBA
  • Sound emission at a distance of one metre from the nozzle 70 dBA
  • Empty weight / operating weight: approx. 20 kg / 25 kg.
  • Working range +10°C to +35°C
  • Protection class IP44
  • Brine atomiser capacity approx. 32l brine/h at 40 s. Dosing time and 5 min. pause
  • Control with 3.2" touch built into housing
  • SA peristaltic pump with speed control for adjusting the dosing quantity
  • Water separator
  • Diaphragm piston compressor (floor standing)
  • Two-substance nozzle made of stainless steel V4A with cover plate, wall bushing, 5 m dosing line PTFE and 5 m air line PE
  • Disinfection set with disinfection tablet, mixing container and recipient
  • 5 kg (optionally 1 kg) aseptic brine solution in the Politainer
  • Design cover
  • Technical room/cabinet for installation of the system
  • 230 V socket
  • Before installation, all materials must be checked for corrosion resistance to the salty water/air mixture in the room, both in the corresponding cabin and in the supply and exhaust air shafts.
  • The dosing station has no medical approval.
  • Use only high-purity, disinfected WDT brine solution with approx. 5% brine content. WDT brine is supplied in a closed container. Open brine germinates and must therefore not be used as a precautionary health measure.
  • Push-button plate with flush-mounted box
  • Second pump and nozzle for cabins larger than 35 m² floor space
  • Effect lighting
  • MP3 player and loudspeaker

Solenebler SOLFOG V2

The brine nebuliser produces a very fine, dry mist from highly pure brine solution by means of an ultrasonic nebuliser. This dense mist is fed into the room by an air current generated in the unit. This creates a salty sea climate in the respective room. The brine is sucked out of an airtight folding bag (politainer). By using sterilised brine from the politainer, the risk of germination of the solution is minimised. In addition, a disinfection system is integrated into the system. A salty room climate is considered to promote healing in respiratory and skin diseases. In addition, the corresponding room can be scented with the system. For this purpose, fragrance concentrate is evaporated in the system and the aromatised air is blown into the room together with the brine mist.

  • Area of application: relaxation rooms, infrared cabins, salt rooms
  • Electrical connection: 230V/AC 50Hz
  • Connected load: 50W
  • External control: port-free contact
  • Application area: Interior
  • Dimensions (WxHxD): 40x71x25 cm
  • Fogger tube connection: d 40 mm
  • Working range: +10 to +35°C
  • Protection class: IP44
  • Empty/operating weight: 11 kg/16 kg
  • Brine atomisation: max. 0.5 l/h
  • Microprocessor control NT-35 in housing
  • 5-line LCD display with 3 operating keys
  • SA peristaltic metering pump for brine replenishment
  • Fan
  • Ultrasonic nebuliser 
  • Fogger container  
  • Mounting plate with console for max. 5l brine
  • Disinfection set with disinfection tablet, mixing container and recipient
  • 5kg aseptic brine solution in politainer
  • Technical room/cabinet for installation of the system
  • Socket 230 V/50 Hz
  • Piping to room / cabin, d 40mm
  • Before installation, all materials, both in the corresponding cabin and in the supply and exhaust air shafts, must be checked for their resistance to corrosion by salty air in the room. 
  • The dosing station has no medical approval.
  • Use only high-purity, disinfected WDT brine solution with approx. 5% brine content. WDT brine is supplied in a closed container. Open brine germinates and must therefore not be used as a precautionary health measure. Suitable for rooms up to max. 60°C room temperature 
  • Push-button plate with flush-mounted box
  • Stainless steel nozzle orifice
  • Fogger cone tube made of PVC, d 40mm with fogger screen made of aluminium
  • Fragrance

Brine fogging systems for steam baths

Brine dosing SOLDOS V3

Previous slide
Next slide

Brine fogging system for creating a salty sea climate in steam cabins. The Soldos sprays finely atomised, germ-free brine solution into steam cabins. After a short time, a salty sea climate is created in the room. The dosing capacity is sufficient for rooms up to approx. 25 m² floor space. The brine is sucked out of an airtight folding bag (politainer). It is pressed under high pressure by a diaphragm pump through a fine nozzle and atomised. By using sterilised brine from the Politainer, the risk of contamination of the solution is minimised. In addition, a disinfection system is integrated into the unit. Operation is via a 3.2" full colour touch display with a variety of new setting options such as:

  • Operating modes: cyclic operation, push-button operation and operation by external control
  • Weekly programme for setting the operating times individually for each day
  • Light and sound control in combination with brine fogging
  • Pressure monitoring for brine level and nozzle blockage
  • Day counter to signal a necessary disinfection and visual description of the process
  • Definition of a user hierarchy with several user levels
  • Area of application steam baths
  • Electrical connection 230V/AC 50Hz
  • Connection cable 350W
  • Size (WxHxD): 47x71x24 cm
  • Empty weight / operating weight: approx. 15 kg / 20 kg.
  • Working range +10°C to +35°C
  • Protection class IP44
  • Brine atomiser capacity approx. 100 ml/min
  • Control with 3.2" touch built into housing
  • Motor diaphragm pump, low-noise
  • Mounting plate with console for brine tank
  • Nozzle made of stainless steel V4A with cover PE
  • Wall bushing with 5 m dosing line PTFE
  • Disinfection set with disinfection tablet, mixing container and recipient
  • 5 kg (optionally 1 kg) aseptic brine solution in the Politainer
  • Design cover
  • Technical room/cabinet for installation of the system
  • 230 V socket
  • Before installation, all materials must be both in
    the corresponding cabin, as well as in supply and exhaust air shafts.
    on their corrosion resistance to
    the salty water/air mixture in the room
    be reviewed.
  • The dosing station has no medical approval.
  • Only highly purified, disinfected WDT brine solution with
    Use approx. 5% brine content. WDT brine is used in the
    closed container is supplied. Open brine
    germs and must therefore not be used for health reasons.
    precaution are not used.
  • When the SOLDOS is at a higher level than the
    nozzle is installed, a non-return valve must be installed in the
    dosing line must be installed.
  • The Soldos V3 is not suitable for use in dry, humid or
    Cabins. For this application we recommend
    our SOLDOS-SL or SOLFOG systems.
  • Push-button plate with flush-mounted box
  • Second pump and nozzle for cabins larger than 25 m² floor space
  • Effect lighting
  • MP3 player and loudspeaker
  • Nozzle orifice in stainless steel

Soldos V3-2P brine dosing with two nozzles

Previous slide
Next slide

SOLDOS-V3-2P for brine fogging in steam baths. Suitable for baths larger than 25 m². Brine fogging dosing station with 2 pumps and 2 nozzles.
Brine is an important component of a steam bath. The effect of brine on our body is very positive in many ways. It reduces diseases of the respiratory tract and helps to alleviate sleep disturbances. The healthy sea climate with salty air has a healing effect on skin problems and circulatory complaints.

  • Area of application steam baths
  • Electrical connection 230V/AC 50Hz
  • Connection cable 350W
  • Size (WxHxD): 47x71x24 cm
  • Empty weight / operating weight: approx. 15 kg / 20 kg.
  • Working range +10°C to +35°C
  • Protection class IP44
  • Brine atomiser capacity approx. 100 ml/min
  • Control with 3.2" touch built into housing
  • Motor diaphragm pump, low-noise
  • Mounting plate with console for brine tank
  • Nozzle made of stainless steel V4A with cover PE
  • Wall bushing with 5 m dosing line PTFE
  • Disinfection set with disinfection tablet, mixing container and recipient
  • 5 kg (optionally 1 kg) aseptic brine solution in the Politainer
  • Design cover
  • Technical room/cabinet for installation of the system
  • 230 V socket
  • Before installation, all materials must be both in
    the corresponding cabin, as well as in supply and exhaust air shafts.
    on their corrosion resistance to
    the salty water/air mixture in the room
    be reviewed.
  • The dosing station has no medical approval.
  • Only highly purified, disinfected WDT brine solution with
    Use approx. 5% brine content. WDT brine is used in the
    closed container is supplied. Open brine
    germs and must therefore not be used for health reasons.
    precaution are not used.
  • When the SOLDOS is at a higher level than the
    nozzle is installed, a non-return valve must be installed in the
    dosing line must be installed.
  • The Soldos V3 is not suitable for use in dry, humid or
    Cabins. For this application we recommend
    our SOLDOS-SL or SOLFOG systems.
  • Push-button plate with flush-mounted box
  • Second pump and nozzle for cabins larger than 25 m² floor space
  • Effect lighting
  • MP3 player and loudspeaker
  • Nozzle orifice in stainless steel

Solenebler SOLFOG WDT

Solenebler SOLFOG produces a very fine, dry mist by means of an ultrasonic fogger. This mist is supplied by an air current generated in the unit. This device creates a salty sea climate. In addition, the corresponding room can also be scented with this system. A fragrance concentrate is evaporated in the unit and the aromatised air with the brine mist is sprayed into the room. Thanks to the sterilised brine from the Politainer, the risk of germination of the solution is prevented. In addition, a disinfection system is integrated into the unit.

  • Area of application: relaxation rooms,
  • Infrared cabins, salt rooms
  • Electrical connection: 230V/AC 50 Hz
  • Connected load: 455 W
  • Size (WxHxD): 45x71x24 cm
  • Compressor size: 24x25x16 cm
  • Empty/operating weight: approx.20 kg / 25 kg
  • Sound emission of the compressor in the technical room: 80 dBA
  • Sound emission in one metre
  • Distance to nozzle: 70 dBA
  • Working range: +10°C to +35°C
  • Protection class: IP44
  • Brine atomiser capacity: approx. 0.32 l
  • Brine/h with 40 s dosing time and 5 min pause
  • Microprocessor control UNPL in housing
  • Rotary potentiometers for setting the individual parameters
  • Peristaltic pump SR10 for brine replenishment
  • Fan
  • Ultrasonic fogger
  • Fog container
  • Mounting plate with console for brine tank
  • Disinfection set with disinfection tablet, mixing container and recipient
  • 5 kg aseptic brine solution in the Politainer

Brine solution 6 x5 ltr.
WDT

Brine solution with disinfection tablets for brine nebulisation. Spare parts and accessories for saunas, steam baths. Brine. Germ-free, 5% brine solution for spraying in steam baths with SOLDOS to create a salty sea climate.

Filled in politainers (folding bags) to keep the solution sterile.

More health with Fire & Ice

Salt Stones

Many possibilities for room design with the salt stones from Fire & Ice. Through a pleasant play of light, the salt stones have a beneficial effect on our emotional state and give us the invigorating freshness. It is a wonderful addition to both private and public spaces.

Previous slide
Next slide

Infrared radiator

Different variants of infrared radiators, both surface, ceramic and magnesium radiators, as well as deep heat radiators and full spectrum radiators. Short heating times, low temperatures for minor physical strain as well as high-quality accessories such as coloured light devices and infrared cabin equipment clearly speak for this type of sauna.

Previous slide
Next slide

Advice from A-Z

Bild Georg Zelger

We advise you online and by telephone. No matter what enquiry you have or what advice you are looking for, we have specialists in-house for every concern who will provide you with friendly, customer-oriented advice. Can't find a particular product in our range? We are constantly adding new products. Please do not hesitate to contact us, we will try to fulfil every wish. We also support you in the implementation of your project, from planning to turnkey handover.

en_GBEnglish (UK)